Rabaud Post peelers

Rabaud produce 2 sizes of post peeler, known as the Robopel, 150 & 250

Rabaud launch 2 new post pointers see below

Robopel 150

  • Manual peeler adaptable on Tractor 3-point linkage or Three-phased electric engine 380V (in option).

  • suitable for round and split wood

  • Wood peeling on diameter from 40 up to 150mm.

  • Chips discharge blower with swivelling spout at 360°. Ideal for loading the chips into a trailer.

  • Self-supported post (if less longer than 1.00m).

  • Very efficient thanks to a convex disc fitted with 6 adjustable blades.

  • suited to small producers

 

 

Robopel 250

  • Semi-automatic peeler adaptable on Tractor 3-point linkage. Mixed electric/hydraulic unit 20hp (in option).

  • Peels off all sorts of round posts: chestnut, black-wodd, oak…

  • Peels wood of diameter 40 up to 250mm.

  • Wood forwarding speed can be adjusted: output 60 up to 120 posts/h.

  • Adjustment of the peeling quality by pressure of the two pinions on the wood.

  • Very efficient thanks to a convex disc fitted with 6 adjustable blades.

  • Post is held at the entrance and at the exit of the machine with the V-positioned tyre wheels.

  • NEW: Automatic release of the driving rollers (option).

  • Discharge blower for the chips with mobile spout at 360°. Ideal for discharging the chips into a trailer.

 

 

Rabaud Post pointers

Biface 240

​​

  • Points all sorts of posts (round or split) and all sorts of woods (chestnut, blac-wood, oak, pine...) upto 240 mm

  • Quick pointing of 2 sides of the post in the same time on the wood direction thanks to the 2 blades.

  • Blades are sharp and made out of hard-wear steel.

  • Mechanical adjustment of the pointing angle (length) and of the final point section according to the post diameter.

  • Safety of the blades supports

  • very popular model for smaller producers

 

Biface 350 with elevator

  • Points all sorts of posts (round or split) and all sorts of woods (chestnut, , oak, pine...) upto  350mm diameter

  • Quick pointing of 2 sides of the post in the same time on the wood direction thanks to the 2 blades


  • Blades are sharp and made out of hard-wear steel.

  • Automatic blade start with the self-supported post (on BIFACE 240 & 350) Exclusivity RABAUD - Unique on the market.

  • Mechanical adjustment of the pointing angle (length) and of the final point section according to the post diameter.

  • Safety of the blades supports.

  • Available with optional extra discharge conveyor

  • suited to larger producers or for larger material